Which of the following should be removed prior to replacing or upgrading memory in a laptop?

Which of the following printer components is responsible for flipping the paper over to allow printing on both sides


Options are :

  • Image transfer assembly
  • Duplexing assembly (Correct)
  • Paper registration assembly
  • Fusing assembly

Answer : Duplexing assembly

CompTIA CySA+ (CS0-002) Practice Certification Exams Set 2


Options are :

  • Replace the rollers in the printer.
  • Clean all of the printer rollers with alcohol.
  • Replace the paper with new stock. (Correct)
  • Remove and clean the print heads.

Answer : Replace the paper with new stock.

A technician is tasked with adding an expansion card to connect an external device. Which of the following expansion cards would provide the FASTEST data transfer speeds


Options are :

  • RS-232
  • IEEE 1394 (Correct)
  • USB 2.0
  • EIDE

Answer : IEEE 1394

Joe, a technician, is asked to replace the LCD panel portion of a laptop screen. Upon removing the outside cover, Joe finds loose wires surrounding the LCD panel. Which of the following is the MOST likely purpose of these wires


Options are :

  • Wiring for an a Bluetooth adapter
  • Reduces EMI for a clearer video picture
  • Antennas for the wireless network card (Correct)
  • Connections for a high performance video card

Answer : Antennas for the wireless network card

CompTIA JK0-801 A+ Certification Practical Exam Set 6


Options are :

  • FireWire
  • Infrared (Correct)
  • 802.11n
  • Bluetooth

Answer : Infrared

Which of the following cable types should be used for analog telephony in a fire safety zone where EMI is known to be highX (Select TWO).


Options are :

  • Plenum STP CAT3 (Correct)
  • PVC Multimode Fiber
  • PVC CAT6
  • Plenum Multimode Fiber
  • Plenum CAT5e (Correct)
  • Plenum Single-mode Fiber

Answer : Plenum STP CAT3 Plenum CAT5e

A technician is building a new workstation for a user that will be performing 3D video rendering. Which of the following is MOST likely a requirement for this workstationX (Select TWO).


Options are :

  • HDMI Output
  • Additional USB 3.0 Ports
  • Specialized Video Card (Correct)
  • High Capacity Hard drive (Correct)
  • Gigabit Network Access
  • Liquid Cooling

Answer : Specialized Video Card High Capacity Hard drive

CompTIA PD1-001 PDI+ Beta Certification Practice Exam Set 6


Options are :

  • Dual memory channel
  • Integrated GPU
  • Hyperthreading (Correct)
  • 64-bit support

Answer : Hyperthreading

Which of the following settings for a serial port expansion card is the default for MOST external modems


Options are :

  • 6, Yes, 0
  • 6, None, 1
  • 8, Yes, 0
  • 8, None, 1 (Correct)

Answer : 8, None, 1

A technician needs to install a new printer to a computer in a SOHO environment. The technician wants the printer connection to have the FASTEST speed. Which of the following types of connectors should the new printer have


Options are :

  • Parallel
  • FireWire 400
  • USB 2.0 (Correct)
  • DB-9

Answer : USB 2.0

CompTIA IT Fundamentals (Exam FC0-U61) Practice Tests Set 1


Options are :

Answer : 5

A multi-form impact printer is having print smearing issues and jams frequently. Which of the following should a technician do FIRST to fix both issues


Options are :

  • Replace the ribbon
  • Replace the paper
  • Clean the print head
  • Replace the print head (Correct)

Answer : Replace the print head

A technician has been asked by Joe, an end user, to select a new monitor for his desk. Due to desk size, Joe needs the thinnest monitor possible. Which of the following monitor types would BEST suit his needs


Options are :

  • LCD
  • DLP
  • OLED (Correct)
  • CRT
  • Plasma

Answer : OLED

CompTIA A+ (220-1001) Practice Exams (Over 500 questions!) Set 29


Options are :

  • Crossover (Correct)
  • RG-59
  • Straight-through
  • Plenum

Answer : Crossover

Which of the following encryption methods offers the highest level of security


Options are :

  • WPA-PSK
  • WEP
  • WPA2 (Correct)
  • WPA-AES

Answer : WPA2

A technician is tasked with building a virtualization workstation. Which of the following are the MOST critical requirementsX (Select TWO).


Options are :

  • CPU (Correct)
  • Dual monitors
  • RAM (Correct)
  • SSD
  • High-end GPU
  • Liquid cooling

Answer : CPU RAM

CompTIA CTT+ Essentials Practice Test Certification Set 2


Options are :

  • TELNET
  • SSH (Correct)
  • HTTP
  • SFTP

Answer : SSH

Which of the following would be a typical use for a KVM


Options are :

  • Archiving network data
  • Providing network printer sharing
  • Networking several PCs
  • Sharing peripherals among several PCs (Correct)

Answer : Sharing peripherals among several PCs

Which of the following memory types is normally associated with the RAM in a desktop PC


Options are :

  • SODIMM
  • Non-ECC (Correct)
  • ECC
  • ROM

Answer : Non-ECC

CompTIA A+ (220-1002) Test Prep, Exams and Simulations Set 2


Options are :

  • Size of the processor heatsink
  • Use of thermal paste (Correct)
  • Number of cabinet fans
  • Installing a liquid cooling system

Answer : Use of thermal paste

A technician receives a maintenance kit in the mail for a printer. The maintenance kit contains a fuser, a pickup roller, and four paper rollers. Into which of the following types of printers should this maintenance kit be installed


Options are :

  • Impact
  • Laser (Correct)
  • Inkjet
  • Thermal

Answer : Laser

A technician installs a secondary hard drive on a PC. The new drive does not show up in the operating system or the BIOS; only the primary is listed. The technician verified that the drive has been connected properly. Which of the following should the technician do to make the drive available to the system


Options are :

  • Remove the CMOS battery to clear the BIOS settings
  • Move the cable on the motherboard to a different port
  • Enable the S.M.A.R.T. setting in the BIOS
  • Move the jumper on the secondary drive off of master (Correct)

Answer : Move the jumper on the secondary drive off of master

CompTIA A+ (220-1001) Practice Exams (Over 500 questions!) Set 33


Options are :

Answer : 2

A technician is asked to install a PC for Anne, a new user. Anne will be performing all of her work on a remote server. Which of the following will MINIMIZE local resource utilization


Options are :

  • Thick Client
  • Virtualization Workstation
  • Thin Client (Correct)
  • CAD Workstation

Answer : Thin Client

Which of the following describes pairing multiple sticks of RAM to increase performance


Options are :

  • Hyperthreading
  • Double-sided
  • Hypertransport
  • Multi-channel (Correct)

Answer : Multi-channel

CompTIA PD1-001 PDI+ Beta Certification Practice Exam Set 4


Options are :

  • USB 3.0 card
  • Video card with dual monitor output
  • PCIe RAID controller
  • TV tuner card (Correct)

Answer : TV tuner card

A technician is advised that a laptop battery is no longer charging. Which of the following is the BEST way to begin diagnostic testing for a battery


Options are :

  • Unplug the power supply from the laptop
  • Test the battery with a multimeter.
  • Remove the battery and run on AC power
  • Reboot into the BIOS. (Correct)

Answer : Reboot into the BIOS.

Memory with built-in features to recover from errors is also known as:


Options are :

  • ECC. (Correct)
  • DDR.
  • SDRAM
  • parity.

Answer : ECC.

JK0-802 CompTIA A+ Certification Exam Set 12


Options are :

  • ITX form factor (Correct)
  • High-end cooling
  • Dual monitor outputs
  • Raid array
  • HDMI output (Correct)

Answer : ITX form factor HDMI output

A manufacturer claims that a certain board supports DDR2 800, but the computer will only post with DDR2 667. Which of the following needs to be performed


Options are :

  • Change boot order
  • Set date/time
  • Flash BIOS (Correct)
  • Change multiplier

Answer : Flash BIOS

Which of the following cable types has extra shielding built into the cable to guard against EMI


Options are :

  • Single-mode
  • Multimode
  • STP (Correct)
  • UTP

Answer : STP

CompTIA PD1-001 PDI+ Beta Certification Practice Exam Set 3


Options are :

  • The new supply must have a 6 pin Molex cable.
  • The supply must have a 4 pin Molex cable. (Correct)
  • The new supply must have a 20 pin Molex cable.
  • The supply must have the same size cooling fan.

Answer : The supply must have a 4 pin Molex cable.

Which of the following types of memory is PC3-8500


Options are :

  • DDR2
  • DDR
  • RAMBUS
  • DDR3 (Correct)

Answer : DDR3

Which of the following is the physical width of a laptop hard drive in inches


Options are :

Answer : 2.5

CompTIA CA1-001 Advanced Security Practitioner Practice Exam Set 3


Options are :

  • SD Card Slot
  • SODIMM
  • DIMM
  • PCMCIA (Correct)

Answer : PCMCIA

By default, which of the following ports is used for DNS


Options are :

Answer : 53

A local low broadcast television station has asked Ann, a technician, to build a computer that can be used to create commercials. Which of the following should she consider FIRST


Options are :

  • TV tuner
  • High-end graphics card (Correct)
  • Surround sound capable sound
  • Water cooled CPU

Answer : High-end graphics card

CompTIA A+ (220-1002) Test Prep, Exams and Simulations Set 1


Options are :

  • Disable CD/DVD from boot options.
  • Place HDD on top of boot options. (Correct)
  • Ensure MBR is properly formatted.
  • Remove any external USB drives during boot.

Answer : Place HDD on top of boot options.

Which of the following cable types is used to prevent exposure to toxins in the event of a fire


Options are :

  • CAT6
  • PVC
  • Plenum (Correct)
  • RG-59

Answer : Plenum

Which of the following components is sometimes built into a laptop LCD panel


Options are :

  • HDMI port
  • Microphone (Correct)
  • SD Card Reader
  • Battery

Answer : Microphone

CV0-001 CompTIA Cloud+ Certification Practice Exam Set 1


Options are :

  • SCSI
  • USB
  • EIDE (Correct)
  • SATA

Answer : EIDE

Which of the following expansion slots would be MOST commonly used to add peripheral devices onto laptops


Options are :

  • SD Card Slot
  • SODIMM
  • PCMCIA (Correct)
  • DIMM

Answer : PCMCIA

JK0-019 CompTIA E2C Network + Certification Exam Set 5


Options are :

  • Battery (Correct)
  • Hard drive
  • Optical drive
  • Wireless card

Answer : Battery

A technician is building a new workstation for a user that will be performing 3D video rendering. Which of the following is MOST likely a requirement for this workstationX (Select TWO).


Options are :

  • Additional USB 3.0 Ports
  • Liquid Cooling
  • Gigabit Network Access
  • Specialized Video Card (Correct)
  • HDMI Output
  • High Capacity Hard drive (Correct)

Answer : Specialized Video Card High Capacity Hard drive

Which of the following encryption methods offers the highest level of security


Options are :

  • WPA2 (Correct)
  • WPA-AES
  • WPA-PSK
  • WEP

Answer : WPA2

CompTIA CTT+ Essentials Practice Test Certification Set 12


Options are :

  • Unplug the power supply from the laptop
  • Remove the battery and run on AC power
  • Test the battery with a multimeter.
  • Reboot into the BIOS. (Correct)

Answer : Reboot into the BIOS.

Which of the following would be important considerations when building a home theater PCX (Select TWO).


Options are :

  • Dual monitor outputs
  • ITX form factor (Correct)
  • HDMI output (Correct)
  • High-end cooling
  • Raid array

Answer : ITX form factor HDMI output

A technician receives a maintenance kit in the mail for a printer. The maintenance kit contains a fuser, a pickup roller, and four paper rollers. Into which of the following types of printers should this maintenance kit be installed


Options are :

  • Laser (Correct)
  • Thermal
  • Impact
  • Inkjet

Answer : Laser

N10-006 CompTIA Network+ Certification Practice Test Set 5


Options are :

  • 8, Yes, 0
  • 6, Yes, 0
  • 6, None, 1
  • 8, None, 1 (Correct)

Answer : 8, None, 1

Which of the following memory types is normally associated with the RAM in a desktop PC


Options are :

  • ECC
  • SODIMM
  • Non-ECC (Correct)
  • ROM

Answer : Non-ECC

When designing a gaming computer based upon dual video cards, which of the following two components will need to be chosen to specifically support a dual video adapter configurationX (Select TWO).


Options are :

  • DDR Memory
  • Motherboard (Correct)
  • Dual Channel Memory
  • RAID 5 configuration
  • Power supply (Correct)

Answer : Motherboard Power supply

CompTIA CySA+ (CS0-002) Practice Certification Exams Set 8


Options are :

  • Disable CD/DVD from boot options.
  • Remove any external USB drives during boot.
  • Ensure MBR is properly formatted.
  • Place HDD on top of boot options. (Correct)

Answer : Place HDD on top of boot options.

Which of the following types of memory is PC3-8500


Options are :

  • DDR2
  • RAMBUS
  • DDR3 (Correct)
  • DDR

Answer : DDR3

A user is looking to have a home theater PC built. Which of the following components should a technician include in this build


Options are :

  • TV tuner card (Correct)
  • PCIe RAID controller
  • Video card with dual monitor output
  • USB 3.0 card

Answer : TV tuner card

CompTIA LX0-102 Linux Part 2 Certification Practice Exam Set 1


Options are :

Answer : 2.5

A technician installs three hard drives into a computer. The user would like the drives configured such that the RAID array has the best write performance and if one of the drives were to fail the user would still have a fully operational PC. Which of the following RAID types should the technician configure


Options are :

Answer : 5

Memory with built-in features to recover from errors is also known as:


Options are :

  • parity.
  • SDRAM
  • DDR.
  • ECC. (Correct)

Answer : ECC.

CompTIA JK0-018 Security+ E2C Certified Practice Exam Set 2


Options are :

  • DB-9
  • FireWire 400
  • USB 2.0 (Correct)
  • Parallel

Answer : USB 2.0

A technician installing hard drives into a computer needs to set jumpers on the drives to master and slave. Which of the following types of drives is the technician installing


Options are :

  • SCSI
  • USB
  • SATA
  • EIDE (Correct)

Answer : EIDE

Which of the following video interfaces uses the smallest footprint to connect multiple monitors given compatible hardware


Options are :

  • VGA
  • HDMI
  • DVI
  • DisplayPort (Correct)

Answer : DisplayPort