Show
Recommended textbook solutionsChemistry: Atoms First2nd EditionEdward Neth, Klaus Theopold, Paul Flowers, Richard Langley, William R. Robinson 1,737 solutions
Chemistry: The Molecular Nature of Matter and Change6th EditionMartin S. Silberberg 2,958 solutions
Chemistry: The Central Science12th EditionBruce E. Bursten, Catherine J. Murphy, H. Eugene Lemay, Patrick Woodward, Theodore E. Brown 6,413 solutions
Chemistry, AP Edition7th EditionZumdahl 4,534 solutions Titration of a strong acid with a strong base is the simplest of the four types of titrations as it involves a strong acid and strong base that completely dissociate in water, thereby resulting in a strong acid-strong base neutralization reaction. This titration requires the use of a buret to dispense a strong base into a container of strong acid, or vice-versa, in order to determine the equivalence point. The purpose of a strong acid-strong base titration is to determine the concentration of the acidic solution by titrating it with a basic solution of known concentration, or vice-versa, until neutralization occurs. As both the acid and base are strong (high values of Ka and
Kb), they will both fully dissociate, which means all the molecules of acid or base will completely separate into ions. At the equivalence point, equal amounts of H+ and OH- ions will combine to form H2O, resulting in a pH of 7.0 (neutral). The pH at the equivalence point for this titration will always be 7.0, note that this is true only for titrations of strong acid with strong base. In addition, the anion (negative ion) created from the dissociation
of the acid combines with the cation (positive ion) created from the dissociation of the base to create a salt. Therefore, the reaction between a strong acid and strong base will result in water and a salt. Table \(\PageIndex{1}\) lists common strong acids and strong bases, it is wise to memorize this table as this will be useful in solving titration problems. The acids and bases that are not listed in this table can be considered weak. Note that the strong bases consist of a hydroxide ion (OH-) and an element from either the alkali or alkaline earth metals. An acid that is completely ionized in aqueous solution. This means when the strong acid is placed in a solution such as water, all of the strong acid will dissociate into its ions, as opposed to a weak acid. The general equation of the dissociation of a strong acid is: \[ HA\; (aq) \rightarrow H^+\;
(aq) + A^-\; (aq) \] The H represents hydrogen and the A represents the conjugate base (anion) of the acid. A base that is completely ionized in aqueous solution. This means when the strong base is placed in a solution such as water, all of the strong base will dissociate into its ions.
The general equation of the dissociation of a strong base is: \[ XOH\;(aq) \rightarrow X^+\;(aq) + OH^-\;(aq) \] The OH represents hydroxide and the X represents the conjugate acid (cation) of the base. The first step in writing an acid-base reaction is determining
whether the acid and base involved are strong or weak as this will determine how the calculations are carried out. For reactions with strong acid and strong base, the net ionic equation will always be the same since the acid and base completely dissociate and the resulting salt also dissociates. This leaves the final product to simply be water, this is displayed in the following example involving hydrochloric acid (HCl) and sodium hydroxide (NaOH). From Table \(\PageIndex{1}\), you can see that
HCl is a strong acid and NaOH is a strong base. Therefore, the reaction between HCl and NaOH is initially written out as follows: \[ HCl\;(aq) + NaOH\;(aq) \rightarrow H_2O\;(l) + NaCl \; (aq) \] Since HCl and NaOH fully dissociate into their ion components, along with sodium chloride (NaCl), we can rewrite the equation as: H+(aq) + Cl-(aq) + Na+(aq) + OH-(aq) -->
H2O(l) + Na+(aq) + Cl-(aq) We can simplify this equation by writing the net ionic equation of this reaction by eliminating the reactants with state symbols that don't change, these reactants are known as spectator ions: H+(aq) + Cl-(aq) + Na+(aq) + OH-(aq) -->
H2O(l) + Na+(aq) + Cl-(aq) We are left with: \[ H^+\;(aq) + OH^-\;(aq) \rightarrow H_2O\;(l) \] The above equation describes the most important concept of a strong acid/strong base reaction, which is that a strong acid provides H+ ions (more specifically hydronium ion \(H_3O^+ \) ) that combine with OH- ions from a strong base to form water. One thing to note is that the anion of our acid HCl was Cl-(aq), which combined with the cation of our base NaOH, Na+(aq). This formed the salt NaCl(aq), which isn't shown in the net ionic equation since it dissociates. It is important, however, to remember that a strong acid/strong base reaction does form a salt. The net ionic equation for a strong acid-strong base reaction is always: \[ H^+\;(aq) + OH^-\;(aq) \rightarrow H_2O\; (l) \] Example \(\PageIndex{1}\) Write out the net ionic equations of the reactions:
SOLUTION From Table \(\PageIndex{1}\), you can see that HI and KOH are a strong acid and strong base, respectively. Therefore: \[ HI\;(aq) + KOH\;(aq) \rightarrow H_2O\;(l) + KI\; (aq) \] H+(aq) + I-(aq) + K+(aq) + OH-(aq) --> H2O(l) + K+(aq) + I-(aq) H+(aq) + I-(aq) + K+(aq) + OH-(aq) --> H2O(l) + K+(aq) + I-(aq) H+(aq) + OH-(aq) --> H2O(l) (Final Answer) Solution: NaOH is a strong base but H2C2O4 is a weak acid since it is not in the table. Therefore, this is a weak acid-strong base reaction which is explained under the link, titration of a weak acid with a strong base. TitratingTitration is a procedure for carrying out a chemical reaction between two solutions by the controlled addition from a buret of one solution into the other. A method, such as an indicator, must be used in a titration to locate the equivalence point. When titrating, acid can either be added to base or base can be added to acid, both will result in an equivalence point, which is the condition in which the reactants are in stoichiometric proportions. They consume each other, and neither reactant is in excess. Equivalence PointThe equivalence point is the part of the titration when enough base has been added to the acid (or acid added to the base) that the concentration of [H+] in the solution equals the concentration of [OH-]. Since [H+] = [OH-] at the equivalence point, they will combine to form the following equation: \[ H^+\, (aq) + OH^-\; (aq) \rightarrow H_2O,.(l) \] This reaction results in the production of water, which has a neutral pH of 7.0. The pH at the equivalence point is 7.0 because the solution only contains water and a salt that is neutral. Since neither H+ nor OH- molecules remain in the solution, we can conclude that at the equivalence point of a strong acid - strong base reaction, the pH is always equal to 7.0. Further adding acid or base after reaching the equivalence point will lower or raise the pH, respectively. Example \(\PageIndex{2}\) How many liters of 3.4 M HI will be required to reach the equivalence point with 2.1 L of 2.0 M KOH? SOLUTION Since we are given the molarity of the strong acid and strong base as well as the volume of the base, we are able to find the volume of the acid. The equation of the reaction is as follows: \[ HI(aq) + KOH(aq) \rightarrow H_2O\;(l) + KI \;(aq) \] We see that the mole ratio necessary for HI to neutralize KOH is 1:1; therefore, we need the moles of HI to be equal to the KOH present in the solution. To find the number of moles of KOH we multiply the molarity of KOH with the volume of KOH, notice how the liter unit cancels out:
As the moles of KOH = moles of HI at the equivalence point, we have 4.2 moles of HI. To find the volume of the solution of HI, we use the molarity of HI (3.4 M) and the fact that we have 4.2 moles of HI:
By dividing by 3.4 mol HI / L on both sides, we get:
We are left with X = 1.2 L. The answer is 1.2 L of 3.4 M HI required to reach the equivalence point with 2.1 L of 2.0 M KOH.
(3.4 M)(V1) = (2.1 L)(2.0 M) V1 = (2.1 L)(2.0 M) / (3.4 M) = 1.2 Problems Involving pHThe following are examples of strong acid-strong base titration in which the pH and pOH are determined at specific points of the titration. Example \(\PageIndex{3}\) What is the pH when 48.00 ml of 0.100 M NaOH solution have been added to 50.00 ml of 0.100 M HCl solution? SOLUTION Because it is a strong acid-base reaction, the reaction will be: \[ H^+\; (aq) + OH^- \; (aq) \rightarrow H_2O(l) \] The original number of moles of H+ in the solution is: 50.00 x 10-3L x 0.1 M HCl = .005 moles The number of moles of OH- added is: 48.00 x 10-3L x 0.100 M OH- = 0.0048 moles Which results in: 0.005-0.0048 = .0002 moles H+(aq) The total volume of solution is 0.048L + 0.05L = 0.098L [H+]= (.0002/.098L) = 2.0 x 10-3 pH= 2.69 Example \(\PageIndex{4}\) What is the pOH when 5.0 L of a 0.45 M solution of sulfuric acid (H2SO4) is titrated with 2.3 L of a 1.2 M lithium hydroxide (LiOH) solution? SOLUTION To solve this problem we must first determine the moles of H+ ions produced by the strong acid and the moles of OH- ions produced by the strong base, respectively: Acid:
(Since a single mole of H2SO4 produces two moles of H2, we get the ratio of (2 mol H+/ 1 mol H2SO4) Base:
As the moles of H+ are greater than the moles of OH-, we must find the moles of excess H+: 4.5 mol - 2.8 mol = 1.7 mol H+ in excess. Since pOH = -log[OH-], we'll need to first convert the moles of H+ in terms of molarity (concentration). Next, we'll need to determine the concentration of OH- from the concentration of H+. Total volume: 2.3 L + 5.0 L = 7.3 L Using the total volume, we can calculate the molarity of H+:
Next, with our molarity of H+, we have two ways to determine the pOH: 1. [H+][OH-] = 1 * 10-14 [0.23][OH-] = 1 * 10-14 [OH-] = 1 * 10-14 / 0.23 = 4.35 * 10-14 pOH = -log[OH-] = -log(4.35 * 10-14) = 13.4 2. pOH = 14 - pH = 14 - ( -log[H+]) = 14 + log(0.23) = 13.4 The answer is 13.4 in both methods. The Millimole for Problem SolvingIn the examples above, the milliliters are converted to liters since moles are being used. To reduce the amount of unit conversions and complexity, a simpler method is to use the millimole as opposed to the mole since the amount of acid and base in the titration are usually thousandths of a mole. The millimole is one thousandth of a mole, therefore it will make calculations easier. Molarity will be expressed in millimoles to illustrate this principle: Molarity = mol/L = mmol/mL Steps for Problem SolvingFigure \(\PageIndex{1}\): This figure displays the steps in simple terms to solving strong acid-strong base titration problems, refer to them when solving various strong acid-strong base problems. (created by Manpreet Kaur)-
Example \(\PageIndex{5}\) How many Liters of 3.4 M HNO3will be required to reach the equivalence point with 5.0 L of 3.0 M RbOH? What is the pH at the equivalence point? SOLUTION HNO3 (aq) + RbOH (aq) --> H2O (l) + RbNO3 (aq) = H+ (aq) + NO3- (aq) + Rb+ (aq) + OH- (aq) --> H2O (l) + Rb+ (aq) + NO3- (aq) = H+ (aq) + OH- (aq) --> H2O (l) M1V1 = M2V2 M1 = 3.4 M V1 = ? M2 = 3.0 M V2 = 5.0 L (3.4 M) (V1) = (3.0 M)(5.0 L) So, V1 = 4.4 L of HNO3 required. The pH at the equivalence point is 7.0 because this reaction involves a strong acid and strong base. Only the salt RbNO3 is left in the solution, resulting in a neutral pH. Example \(\PageIndex{6}\): Find the pH at the following points in the titration of 30 mL of 0.05 M HClO4 with 0.1 M KOH. A.) Before adding any KOH SOLUTION pH = -log[H+] We know that initially there is 0.05 M HClO4 and since no KOH has been added yet, the pH is simply: pH = -log[0.05 M] pH = 1.30 B.) When 5 mL of 0.1 M KOH is added Solution 30 mL of 0.05 M HClO4 = (30 mL)(0.05 M) = 1.5 mmol H+ 5 mL of 0.1 M KOH = (5 mL)(0.1 M) = 0.5 mmol OH- Write out the reaction between HClO4 and KOH: HClO4 (aq) + KOH (aq) --> H2O (l) + KClO4 = H+ (aq) + ClO4- (aq) + K+ (aq) + OH- (aq) --> H2O (l) + K+ (aq) + ClO4- (aq) net ionic equation = H+ (aq) + OH- (aq) --> H2O (l) Based on this equation we can say that: 1 mol HClO4 = 1 mol H+ 1 mol KOH = 1 mol OH- 1 mol of H+reacts with 1 mol OH-
We subtract 0.5 mmol from both because the OH- acts as the limiting reactant, leaving an excess of 1 mmol H+. Remember that: Molarity = mmol/mL We already have mmol, so to find mL, all we do is add the volume of HClO4 and KOH: Total Volume = mL HClO4 + mL KOH = 30 mL + 5 mL = 35 mL So, Molarity of H+ = (1 mmol)/(35 mL) = 0.029 M pH = -log[H+] = -log[0.029] pH = 1.54 * Notice the pH is increasing as base is added C.) When 15 mL of 0.1 M KOH is added Solution 30 mL of 0.05 M HClO4 = 1.5 mmol 15 mL of 0.1 M KOH = 1.5 mmol
Remember that when [H+] = [OH-], this is the equivalence point. We know that at the equivalence point for a strong acid-strong base titration, the pH = 7.0 So, pH = 7.0 Example \(\PageIndex{7}\): Determine the pH at the following points in the titration of 10 mL of 0.1 M HBr with 0.1 M CsOH when: A.) When 8 mL CsOH is added SOLUTION mmol HBr = mmol H+ = (10 mL)(0.1 M) = 1 mmol H+ mmol CsOH = mmol OH- = (8 mL)(0.1 M) = 0.8 mmol OH- H+ (aq) + OH- (aq) --> H2O (l) * * Remember, this will always be the net ionic equation for strong acid-strong base titrations.
We have 0.2 mmol H+, so to solve for Molarity, we need the total volume. Total Volume = 10 mL H+ + 8 mL OH- = 18 mL Molarity = (0.2 mmol)/(18 mL) = 0.01 M We know pH = -log[H+] so, pH = -log[0.01 M] pH = 2.0 B.) When 10 mL CsOH is added SOLUTION mmol HBr = 1.0 mmol H+ mmol CsOH = (10 mL)(0.1 M) = 1.0 mmol OH- Since [H+] = [OH-], this is the equivalence point and thus, pH = 7.0 C.) When 15 mL CsOH is added SOLUTION mmol HBr = 1.0 mmol H+ mmol CsOH = (15 mL)(0.1 M) = 1.5 mmol OH-
We have 0.5 mmol of OH- so we can figure out molarity of OH-, then find pOH and then use pOH to determine pH because: pOH = 14 - pH Total Volume = 10 mL H+ + 15 mL OH- = 25 mL Molarity = (0.5 mmol)/(25 mL) = 0.02 M Now, pOH = -log[OH-] = -log[0.02 M] = 1.70 pH = 14 - 1.70 pH = 12.30 Example \(\PageIndex{9}\) Determine the pH at each of the following points in the titration of 15 mL of 0.1 M HI with 0.5 M LiOH
SOLUTION The solution to problem 4 is in video form and was created by Manpreet Kaur Example \(\PageIndex{10}\) Determine the pH at each of the following points in the titration of 10 mL of 0.05 M Ba(OH)2 with 0.1 M HNO3
SOLUTION The solution to problem 5 is in video form and was created by Manpreet Kaur pH Curve of a Strong Acid - Strong Base Reaction The pH curve diagram below represents the titration of a strong acid with a strong base: As we add strong base to a strong acid, the pH increases slowly until we near the equivalence point, where the pH increases dramatically with a small increase in the volume of base added. This is due to the logarithmic nature of the pH system (pH = -log [H+]). At the equivalence point, the pH is 7.0, as expected. Passing the equivalence point by adding more base initially increases the pH dramatically and eventually slopes off. References
Contributors
When a weak acid is titrated with a strong base the pH at the equivalence point?In the case of a weak acid versus a strong base, the pH is not neutral at the equivalence point. The solution is basic (pH ~ 9) at the equivalence point.
What is the pH at the equivalence point for a titration of a strong acid by a strong base?In a strong acid-strong base titration, the acid and base will react to form a neutral solution. At the equivalence point of the reaction, hydronium (H+) and hydroxide (OH-) ions will react to form water, leading to a pH of 7. This is true of all strong acid-strong base titrations.
What is the equivalence point of acetic acid and NaOH titration?The equivalence point is the mid-point on the vertical part of the curve. It corresponds to a volume of NaOH of 26 mL and a pH of 8.57. The half equivalence point corresponds to a volume of 13 mL and a pH of 4.6. The value of Ka from the titration is 4.6.
What happens when a weak acid is titrated with a strong base?The titration of a weak acid with a strong base involves the direct transfer of protons from the weak acid to the hydoxide ion. The reaction of the weak acid, acetic acid, with a strong base, NaOH, can be seen below. In the reaction the acid and base react in a one to one ratio.
|