The block of copper is a decorative block that oxidizes over time, gaining a verdigris appearance. It can be crafted into a waxed version that has an identical appearance and does not oxidize. It can also be crafted back into nine copper ingots unless it is in a fully or partly oxidized state or has been crafted into the cut variant. Show Obtaining[]Breaking[]Blocks of copper can be mined only with a stone pickaxe or better. If a block of copper is mined without the use of a pickaxe, it drops nothing.
Crafting[]Stonecutting[]Waxing[]Copper blocks can be turned into the respective waxed copper blocks by using a honeycomb item on them. Waxed copper blocks do not oxidize and are identical to the non-waxed version. Scraping[]Using an axe on a waxed copper block turns it into the respective non-waxed copper block. In addition, using an axe on an exposed, weathered, or oxidized copper block reverts it one stage to a regular, exposed, or weathered copper block respectively. Lightning strike[]Non-waxed copper blocks are completely deoxidized when struck by lightning, and other non-waxed copper blocks nearby are deoxidized randomly. Usage[]Blocks of copper can be used to store copper ingots in a compact fashion. Weathered or cut variants cannot be crafted back into copper ingots, but the waxed block variant can. The cut variant can be crafted into slabs or stairs. Stonecutting blocks of copper gives four times more products than typical for stone. Crafting ingredient[]Stonecutting[]Oxidation[]Non-waxed copper blocks have four stages of oxidation (including the initial normal state). Lightning bolts and axes can remove the oxidation on copper blocks. As the block begins to oxidize (exposed copper), it gets discolored and green spots begin to appear. As the oxidation continues (weathered copper), the block is a green color with brown spots. In the last stage (oxidized copper), the block is teal with several green spots. Oxidation of copper blocks relies only on random ticks. Rain or water does not accelerate oxidation, and covering copper blocks with other blocks does not prevent oxidation. In Java Edition, groups of non-waxed copper blocks oxidize far more slowly than single copper blocks that are spaced at least 4 blocks apart. This is because a block in a group being less oxidized than the others slows down the oxidation process for all other blocks within 4 blocks of taxicab distance. However, if one wishes to increase the oxidation speed, placing oxidized copper blocks around less oxidized copper blocks does not offer a speed improvement over simply placing the blocks 4 apart. The calculations for the oxidation behavior are as follows: In Java Edition, when a random tick is given, a copper block has a 64⁄1125 chance to enter a state called pre-oxidation. This means a copper block enters pre-oxidation after approximately 20 minutes. In pre-oxidation, the copper block searches its nearby non-waxed copper blocks for a distance of 4 blocks taxicab distance. If there is any copper block that has a lower oxidation level, then the pre-oxidation ends, meaning that this copper block does not weather. Let a be the number of all nearby non-waxed copper blocks, and b be the number of nearby non-waxed copper blocks that have a higher oxidation level. We derive the value of c from this equation: c = b + 1⁄a + 1. We also let the modifying factor m be 0.75 if the copper block has no oxidation level, or 1 if the copper block is exposed or weathered.[1] Then the oxidation probability is mc2. For example, an unweathered copper block surrounded by 6 unweathered copper blocks and 6 exposed copper blocks has a 21.7% chance to oxidize if it enters the pre-oxidation state. In this case, a = 12, b = 6, and m = 0.75.[2] The most efficient way of laying out the copper blocks for oxidation is in a 7×7×6 face-centered cubic (fcc)/cubic close-packed (ccp) lattice. Deoxidation[]Using an axe on a waxed copper block turns it into the respective non-waxed copper block. In addition, using an axe on an exposed, weathered, or oxidized copper block reverts it one stage to a regular, exposed, or weathered copper block respectively. The axe removes wax first, then oxidation layers. Lightning can also remove oxidation from copper blocks. A lightning bolt striking an non-waxed copper block (or a lightning rod attached to one) removes all oxidation from the struck block, and may also deoxidize randomly selected copper blocks nearby. In Java Edition, these additional blocks are chosen by random walks as follows: The position of the struck copper block is set as the start point. Then, the game performs 3 to 5 walks. In the beginning of each walk, a judgment point is set at the start point. For each step of the walk, the game randomly selects 10 blocks from a 3×3×3 volume centered on the judgment point. If an non-waxed copper block is found among these 10 blocks, the judgment point is transferred to the first such block found, and 1 oxidation layer of that block is removed (if the block is still unoxidized, the block stays as it is). The number of steps in a walk is between 1 and 8 (inclusive), chosen randomly for each walk. This means that one single lightning strike can deoxidize up to 41 blocks (1 block initially struck by lightning + 5 max walks*8 max steps in every walk).[3] Sounds[]Generic[]Java Edition: Bedrock Edition:[more information needed] Unique[]Java Edition: Data values[]ID[]Java Edition:
Bedrock Edition:
Achievements[]
Advancements[]History[]
Issues[]Issues relating to "Block of Copper" or "Cut Copper" are maintained on the bug tracker. Report issues there. References[] |