My vuse wont hit

Hi I've been having some trouble with my vuse I had put a new pod into it and the light showed up green but I'm getting no vapor what do I do

Hi I've been having some trouble with my vuse I had put a new pod into it and the light showed up green but I'm getting no vapor what do I do

According to this guy, you may have a faulty pod. But I have a feeling you have dirty contacts and that the guy in the video is lazy .

Get a q-tip and clean the contacts on both the bottom of the pod and inside the battery where you put the pod. Use a tiny bit of alcohol on the q-tip if you have it. A tiny bit.

If that doesn't work, contact Vuse Vapor. Contact info in the video.

Yes, the Alto doesn't leak or build up much condensation, but definitely does it. I've never had to use alcohol, but routinely use a q-tip to clean any condensate. Usually, though, it just seems weaker than normal when it's a little wet- but doesn't stop completely.

Occasionally, a quick, sharper than normal draw will activate a pod that doesn't seem to be working, then it's fine after that.

I've been using them for quite a while (but mainly use rta's), and never had a complete dud, though. So try another pod, and if doesn't work, it's almost certainly the battery unit. They do give free certificates for warranty issues. About a year ago, pods were tasting burnt halfway thru (common problem back then), and they sent me coupons for freebies.

Welcome and good luck. Is it still under warranty? Try that route first.

You'll save a lot of aggravation by switching to a different device. innokin (among others) makes great ones that are simple and reliable.

Hi I've been having some trouble with my vuse I had put a new pod into it and the light showed up green but I'm getting no vapor what do I do

Welcome to the ECF Aspen golden.

Did you get your Vuse going?