How to find chi square critical value in excel


When you conduct a Chi-Square test, you will get a test statistic as a result. To determine if the results of the Chi-Square test are statistically significant, you can compare the test statistic to a Chi-Square critical value. If the test statistic is greater than the Chi-Square critical value, then the results of the test are statistically significant.

The Chi-Square critical value can be found by using a Chi-Square distribution table or by using statistical software.

To find the Chi-Square critical value, you need:

  • A significance level (common choices are 0.01, 0.05, and 0.10)
  • Degrees of freedom

Using these two values, you can determine the Chi-Square value to be compared with the test statistic.

To find the Chi-Square critical value in Excel, you can use the CHISQ.INV.RT() function, which uses the following syntax:

CHISQ.INV.RT(probability, deg_freedom)

  • probability: The significance level to use
  • deg_freedom: The degrees of freedom

This function returns the critical value from the Chi-Square distribution based on the significance level and the degrees of freedom provided.

For example, suppose we would like to find the Chi-square critical value for a significance level of 0.05 and degrees of freedom = 11. 

In Excel, we can type the following formula: CHISQ.INV.RT(0.05, 11)

How to find chi square critical value in excel

This returns the value 19.67514. This is the critical value for a significance level of 0.05 and degrees of freedom = 11.

Note that this also matches the number we would find in the Chi-Square distribution table with α = 0.05, DF (degrees of freedom) = 11.

How to find chi square critical value in excel

Cautions on Finding the Chi-Square Critical Value in Excel

Note that the CHISQ.INV.RT() function in Excel will throw an error if any of the following occur:

  • If any argument is non-numeric.
  • If the value for probability is less than zero or greater than 1.
  • If the value for deg_freedom is less than 1.

What’s the difference between relative frequency and probability?

Probability is the relative frequency over an infinite number of trials.

For example, the probability of a coin landing on heads is .5, meaning that if you flip the coin an infinite number of times, it will land on heads half the time.

Since doing something an infinite number of times is impossible, relative frequency is often used as an estimate of probability. If you flip a coin 1000 times and get 507 heads, the relative frequency, .507, is a good estimate of the probability.

How do I perform a chi-square goodness of fit test for a genetic cross?

Chi-square goodness of fit tests are often used in genetics. One common application is to check if two genes are linked (i.e., if the assortment is independent). When genes are linked, the allele inherited for one gene affects the allele inherited for another gene.

Suppose that you want to know if the genes for pea texture (R = round, r = wrinkled) and color (Y = yellow, y = green) are linked. You perform a dihybrid cross between two heterozygous (RY / ry) pea plants. The hypotheses you’re testing with your experiment are:

  • Null hypothesis (H0): The population of offspring have an equal probability of inheriting all possible genotypic combinations.
    • This would suggest that the genes are unlinked.
  • Alternative hypothesis (Ha): The population of offspring do not have an equal probability of inheriting all possible genotypic combinations.
    • This would suggest that the genes are linked.

You observe 100 peas:

  • 78 round and yellow peas
  • 6 round and green peas
  • 4 wrinkled and yellow peas
  • 12 wrinkled and green peas

Step 1: Calculate the expected frequencies

To calculate the expected values, you can make a Punnett square. If the two genes are unlinked, the probability of each genotypic combination is equal.

RY ry Ry rY
RY RRYY RrYy RRYy RrYY
ry RrYy rryy Rryy rrYy
Ry RRYy Rryy RRyy RrYy
rY RrYY rrYy RrYy rrYY

The expected phenotypic ratios are therefore 9 round and yellow: 3 round and green: 3 wrinkled and yellow: 1 wrinkled and green.

From this, you can calculate the expected phenotypic frequencies for 100 peas:

Phenotype Observed Expected
Round and yellow 78 100 * (9/16) = 56.25
Round and green 6 100 * (3/16) = 18.75
Wrinkled and yellow 4 100 * (3/16) = 18.75
Wrinkled and green 12 100 * (1/16) = 6.21

Step 2: Calculate chi-square

Phenotype Observed Expected OE (O − E)2 (O − E)2 / E
Round and yellow 78 56.25 21.75 473.06 8.41
Round and green 6 18.75 −12.75 162.56 8.67
Wrinkled and yellow 4 18.75 −14.75 217.56 11.6
Wrinkled and green 12 6.21 5.79 33.52 5.4

Χ2 = 8.41 + 8.67 + 11.6 + 5.4 = 34.08

Step 3: Find the critical chi-square value

Since there are four groups (round and yellow, round and green, wrinkled and yellow, wrinkled and green), there are three degrees of freedom.

For a test of significance at α = .05 and df = 3, the Χ2 critical value is 7.82.

Step 4: Compare the chi-square value to the critical value

Χ2 = 34.08

Critical value = 7.82

The Χ2 value is greater than the critical value.

Step 5: Decide whether the reject the null hypothesis

The Χ2 value is greater than the critical value, so we reject the null hypothesis that the population of offspring have an equal probability of inheriting all possible genotypic combinations. There is a significant difference between the observed and expected genotypic frequencies (p < .05).

The data supports the alternative hypothesis that the offspring do not have an equal probability of inheriting all possible genotypic combinations, which suggests that the genes are linked

How do I find quartiles in R?

You can use the quantile() function to find quartiles in R. If your data is called “data”, then “quantile(data, prob=c(.25,.5,.75), type=1)” will return the three quartiles.

How do I find quartiles in Excel?

You can use the QUARTILE() function to find quartiles in Excel. If your data is in column A, then click any blank cell and type “=QUARTILE(A:A,1)” for the first quartile, “=QUARTILE(A:A,2)” for the second quartile, and “=QUARTILE(A:A,3)” for the third quartile.

What are the three types of skewness?

The three types of skewness are:

  • Right skew (also called positive skew). A right-skewed distribution is longer on the right side of its peak than on its left.
  • Left skew (also called negative skew). A left-skewed distribution is longer on the left side of its peak than on its right.
  • Zero skew. It is symmetrical and its left and right sides are mirror images.

How to find chi square critical value in excel

How do I find the critical value of t in Excel?

You can use the T.INV() function to find the critical value of t for one-tailed tests in Excel, and you can use the T.INV.2T() function for two-tailed tests.

Example: Calculating the critical value of t in ExcelTo calculate the critical value of t for a two-tailed test with df = 29 and α = .05, click any blank cell and type:

=T.INV.2T(0.05,29)

How do I find the critical value of t in R?

You can use the qt() function to find the critical value of t in R. The function gives the critical value of t for the one-tailed test. If you want the critical value of t for a two-tailed test, divide the significance level by two.

Example: Calculating the critical value of t in RTo calculate the critical value of t for a two-tailed test with df = 29 and α = .05:

qt(p = .025, df = 29)

What are the types of missing data?

There are three main types of missing data.

Missing completely at random (MCAR) data are randomly distributed across the variable and unrelated to other variables.

Missing at random (MAR) data are not randomly distributed but they are accounted for by other observed variables.

Missing not at random (MNAR) data systematically differ from the observed values.

How do I deal with missing data?

To tidy up your missing data, your options usually include accepting, removing, or recreating the missing data.

  • Acceptance: You leave your data as is
  • Listwise or pairwise deletion: You delete all cases (participants) with missing data from analyses
  • Imputation: You use other data to fill in the missing data

How do I calculate the geometric mean?

There are two steps to calculating the geometric mean:

  1. Multiply all values together to get their product.
  2. Find the nth root of the product (n is the number of values).

Before calculating the geometric mean, note that:

  • The geometric mean can only be found for positive values.
  • If any value in the data set is zero, the geometric mean is zero.

What’s the difference between the arithmetic and geometric means?

The arithmetic mean is the most commonly used type of mean and is often referred to simply as “the mean.” While the arithmetic mean is based on adding and dividing values, the geometric mean multiplies and finds the root of values.

Even though the geometric mean is a less common measure of central tendency, it’s more accurate than the arithmetic mean for percentage change and positively skewed data. The geometric mean is often reported for financial indices and population growth rates.

What are outliers?

Outliers are extreme values that differ from most values in the dataset. You find outliers at the extreme ends of your dataset.

How do I find outliers in my data?

You can choose from four main ways to detect outliers:

  • Sorting your values from low to high and checking minimum and maximum values
  • Visualizing your data with a box plot and looking for outliers
  • Using the interquartile range to create fences for your data
  • Using statistical procedures to identify extreme values

What do the sign and value of the correlation coefficient tell you?

Correlation coefficients always range between -1 and 1.

The sign of the coefficient tells you the direction of the relationship: a positive value means the variables change together in the same direction, while a negative value means they change together in opposite directions.

The absolute value of a number is equal to the number without its sign. The absolute value of a correlation coefficient tells you the magnitude of the correlation: the greater the absolute value, the stronger the correlation.

How do you increase statistical power?

There are various ways to improve power:

  • Increase the potential effect size by manipulating your independent variable more strongly,
  • Increase sample size,
  • Increase the significance level (alpha),
  • Reduce measurement error by increasing the precision and accuracy of your measurement devices and procedures,
  • Use a one-tailed test instead of a two-tailed test for t tests and z tests.

What is a power analysis?

A power analysis is a calculation that helps you determine a minimum sample size for your study. It’s made up of four main components. If you know or have estimates for any three of these, you can calculate the fourth component.

  • Statistical power: the likelihood that a test will detect an effect of a certain size if there is one, usually set at 80% or higher.
  • Sample size: the minimum number of observations needed to observe an effect of a certain size with a given power level.
  • Significance level (alpha): the maximum risk of rejecting a true null hypothesis that you are willing to take, usually set at 5%.
  • Expected effect size: a standardized way of expressing the magnitude of the expected result of your study, usually based on similar studies or a pilot study.

How do you reduce the risk of making a Type I error?

The risk of making a Type I error is the significance level (or alpha) that you choose. That’s a value that you set at the beginning of your study to assess the statistical probability of obtaining your results (p value).

The significance level is usually set at 0.05 or 5%. This means that your results only have a 5% chance of occurring, or less, if the null hypothesis is actually true.

To reduce the Type I error probability, you can set a lower significance level.

What is statistical power?

In statistics, power refers to the likelihood of a hypothesis test detecting a true effect if there is one. A statistically powerful test is more likely to reject a false negative (a Type II error).

If you don’t ensure enough power in your study, you may not be able to detect a statistically significant result even when it has practical significance. Your study might not have the ability to answer your research question.

How do I calculate effect size?

There are dozens of measures of effect sizes. The most common effect sizes are Cohen’s d and Pearson’s r. Cohen’s d measures the size of the difference between two groups while Pearson’s r measures the strength of the relationship between two variables.

What is effect size?

Effect size tells you how meaningful the relationship between variables or the difference between groups is.

A large effect size means that a research finding has practical significance, while a small effect size indicates limited practical applications.

What is standard error?

The standard error of the mean, or simply standard error, indicates how different the population mean is likely to be from a sample mean. It tells you how much the sample mean would vary if you were to repeat a study using new samples from within a single population.

How do you know whether a number is a parameter or a statistic?

To figure out whether a given number is a parameter or a statistic, ask yourself the following:

  • Does the number describe a whole, complete population where every member can be reached for data collection?
  • Is it possible to collect data for this number from every member of the population in a reasonable time frame?

If the answer is yes to both questions, the number is likely to be a parameter. For small populations, data can be collected from the whole population and summarized in parameters.

If the answer is no to either of the questions, then the number is more likely to be a statistic.

What are the different types of means?

The arithmetic mean is the most commonly used mean. It’s often simply called the mean or the average. But there are some other types of means you can calculate depending on your research purposes:

  • Weighted mean: some values contribute more to the mean than others.
  • Geometric mean: values are multiplied rather than summed up.
  • Harmonic mean: reciprocals of values are used instead of the values themselves.

How do I find the mean?

You can find the mean, or average, of a data set in two simple steps:

  • Find the sum of the values by adding them all up.
  • Divide the sum by the number of values in the data set.

This method is the same whether you are dealing with sample or population data or positive or negative numbers.

When should I use the median?

The median is the most informative measure of central tendency for skewed distributions or distributions with outliers. For example, the median is often used as a measure of central tendency for income distributions, which are generally highly skewed.

Because the median only uses one or two values, it’s unaffected by extreme outliers or non-symmetric distributions of scores. In contrast, the mean and mode can vary in skewed distributions.

Can there be more than one mode?

A data set can often have no mode, one mode or more than one mode – it all depends on how many different values repeat most frequently.

Your data can be:

  • without any mode
  • unimodal, with one mode,
  • bimodal, with two modes,
  • trimodal, with three modes, or
  • multimodal, with four or more modes.

How do I find the mode?

To find the mode:

  • If your data is numerical or quantitative, order the values from low to high.
  • If it is categorical, sort the values by group, in any order.

Then you simply need to identify the most frequently occurring value.

What are the two main methods for calculating interquartile range?

The two most common methods for calculating interquartile range are the exclusive and inclusive methods.

The exclusive method excludes the median when identifying Q1 and Q3, while the inclusive method includes the median as a value in the data set in identifying the quartiles.

For each of these methods, you’ll need different procedures for finding the median, Q1 and Q3 depending on whether your sample size is even- or odd-numbered. The exclusive method works best for even-numbered sample sizes, while the inclusive method is often used with odd-numbered sample sizes.

What is homoscedasticity?

Homoscedasticity, or homogeneity of variances, is an assumption of equal or similar variances in different groups being compared.

This is an important assumption of parametric statistical tests because they are sensitive to any dissimilarities. Uneven variances in samples result in biased and skewed test results.

What is the empirical rule?

The empirical rule, or the 68-95-99.7 rule, tells you where most of the values lie in a normal distribution:

  • Around 68% of values are within 1 standard deviation of the mean.
  • Around 95% of values are within 2 standard deviations of the mean.
  • Around 99.7% of values are within 3 standard deviations of the mean.

The empirical rule is a quick way to get an overview of your data and check for any outliers or extreme values that don’t follow this pattern.

What is variability?

Variability tells you how far apart points lie from each other and from the center of a distribution or a data set.

Variability is also referred to as spread, scatter or dispersion.

What is the difference between interval and ratio data?

While interval and ratio data can both be categorized, ranked, and have equal spacing between adjacent values, only ratio scales have a true zero.

For example, temperature in Celsius or Fahrenheit is at an interval scale because zero is not the lowest possible temperature. In the Kelvin scale, a ratio scale, zero represents a total lack of thermal energy.

What is a critical value?

A critical value is the value of the test statistic which defines the upper and lower bounds of a confidence interval, or which defines the threshold of statistical significance in a statistical test. It describes how far from the mean of the distribution you have to go to cover a certain amount of the total variation in the data (i.e. 90%, 95%, 99%).

If you are constructing a 95% confidence interval and are using a threshold of statistical significance of p = 0.05, then your critical value will be identical in both cases.

What is a t-score?

A t-score (a.k.a. a t-value) is equivalent to the number of standard deviations away from the mean of the t-distribution.

The t-score is the test statistic used in t-tests and regression tests. It can also be used to describe how far from the mean an observation is when the data follow a t-distribution.

What is a t-distribution?

The t-distribution is a way of describing a set of observations where most observations fall close to the mean, and the rest of the observations make up the tails on either side. It is a type of normal distribution used for smaller sample sizes, where the variance in the data is unknown.

The t-distribution forms a bell curve when plotted on a graph. It can be described mathematically using the mean and the standard deviation.

What is ordinal data?

Ordinal data has two characteristics:

  • The data can be classified into different categories within a variable.
  • The categories have a natural ranked order.

However, unlike with interval data, the distances between the categories are uneven or unknown.

What is nominal data?

Nominal data is data that can be labelled or classified into mutually exclusive categories within a variable. These categories cannot be ordered in a meaningful way.

For example, for the nominal variable of preferred mode of transportation, you may have the categories of car, bus, train, tram or bicycle.

What does it mean if my confidence interval includes zero?

If your confidence interval for a difference between groups includes zero, that means that if you run your experiment again you have a good chance of finding no difference between groups.

If your confidence interval for a correlation or regression includes zero, that means that if you run your experiment again there is a good chance of finding no correlation in your data.

In both of these cases, you will also find a high p-value when you run your statistical test, meaning that your results could have occurred under the null hypothesis of no relationship between variables or no difference between groups.

What are z-scores and t-scores?

The z-score and t-score (aka z-value and t-value) show how many standard deviations away from the mean of the distribution you are, assuming your data follow a z-distribution or a t-distribution.

These scores are used in statistical tests to show how far from the mean of the predicted distribution your statistical estimate is. If your test produces a z-score of 2.5, this means that your estimate is 2.5 standard deviations from the predicted mean.

The predicted mean and distribution of your estimate are generated by the null hypothesis of the statistical test you are using. The more standard deviations away from the predicted mean your estimate is, the less likely it is that the estimate could have occurred under the null hypothesis.

What is the difference between a confidence interval and a confidence level?

The confidence level is the percentage of times you expect to get close to the same estimate if you run your experiment again or resample the population in the same way.

The confidence intervalconsists of the upper and lower bounds of the estimate you expect to find at a given level of confidence.

For example, if you are estimating a 95% confidence interval around the mean proportion of female babies born every year based on a random sample of babies, you might find an upper bound of 0.56 and a lower bound of 0.48. These are the upper and lower bounds of the confidence interval. The confidence level is 95%.

How do I decide which level of measurement to use?

Some variables have fixed levels. For example, gender and ethnicity are always nominal level data because they cannot be ranked.

However, for other variables, you can choose the level of measurement. For example, income is a variable that can be recorded on an ordinal or a ratio scale:

  • At an ordinal level, you could create 5 income groupings and code the incomes that fall within them from 1–5.
  • At a ratio level, you would record exact numbers for income.

If you have a choice, the ratio level is always preferable because you can analyze data in more ways. The higher the level of measurement, the more precise your data is.

Which alpha value should I use?

The alpha value, or the threshold for statistical significance, is arbitrary – which value you use depends on your field of study.

In most cases, researchers use an alpha of 0.05, which means that there is a less than 5% chance that the data being tested could have occurred under the null hypothesis.

How do you calculate a p-value?

P-values are usually automatically calculated by the program you use to perform your statistical test. They can also be estimated using p-value tables for the relevant test statistic.

P-values are calculated from the null distribution of the test statistic. They tell you how often a test statistic is expected to occur under the null hypothesis of the statistical test, based on where it falls in the null distribution.

If the test statistic is far from the mean of the null distribution, then the p-value will be small, showing that the test statistic is not likely to have occurred under the null hypothesis.

What factors affect the test statistic?

The test statistic will change based on the number of observations in your data, how variable your observations are, and how strong the underlying patterns in the data are.

For example, if one data set has higher variability while another has lower variability, the first data set will produce a test statistic closer to the null hypothesis, even if the true correlation between two variables is the same in either data set.

What is meant by model selection?

In statistics, model selection is a process researchers use to compare the relative value of different statistical models and determine which one is the best fit for the observed data.

The Akaike information criterion is one of the most common methods of model selection. AIC weights the ability of the model to predict the observed data against the number of parameters the model requires to reach that level of precision.

AIC model selection can help researchers find a model that explains the observed variation in their data while avoiding overfitting.

How is AIC calculated?

The Akaike information criterion is calculated from the maximum log-likelihood of the model and the number of parameters (K) used to reach that likelihood. The AIC function is 2K – 2(log-likelihood).

Lower AIC values indicate a better-fit model, and a model with a delta-AIC (the difference between the two AIC values being compared) of more than -2 is considered significantly better than the model it is being compared to.

What is a factorial ANOVA?

A factorial ANOVA is any ANOVA that uses more than one categorical independent variable. A two-way ANOVA is a type of factorial ANOVA.

Some examples of factorial ANOVAs include:

  • Testing the combined effects of vaccination (vaccinated or not vaccinated) and health status (healthy or pre-existing condition) on the rate of flu infection in a population.
  • Testing the effects of marital status (married, single, divorced, widowed), job status (employed, self-employed, unemployed, retired), and family history (no family history, some family history) on the incidence of depression in a population.
  • Testing the effects of feed type (type A, B, or C) and barn crowding (not crowded, somewhat crowded, very crowded) on the final weight of chickens in a commercial farming operation.

How is statistical significance calculated in an ANOVA?

In ANOVA, the null hypothesis is that there is no difference among group means. If any group differs significantly from the overall group mean, then the ANOVA will report a statistically significant result.

Significant differences among group means are calculated using the F statistic, which is the ratio of the mean sum of squares (the variance explained by the independent variable) to the mean square error (the variance left over).

If the F statistic is higher than the critical value (the value of F that corresponds with your alpha value, usually 0.05), then the difference among groups is deemed statistically significant.

What is the difference between a one-way and a two-way ANOVA?

The only difference between one-way and two-way ANOVA is the number of independent variables. A one-way ANOVA has one independent variable, while a two-way ANOVA has two.

  • One-way ANOVA: Testing the relationship between shoe brand (Nike, Adidas, Saucony, Hoka) and race finish times in a marathon.
  • Two-way ANOVA: Testing the relationship between shoe brand (Nike, Adidas, Saucony, Hoka), runner age group (junior, senior, master’s), and race finishing times in a marathon.

All ANOVAs are designed to test for differences among three or more groups. If you are only testing for a difference between two groups, use a t-test instead.

How is the error calculated in a linear regression model?

Linear regression most often uses mean-square error (MSE) to calculate the error of the model. MSE is calculated by:

  1. measuring the distance of the observed y-values from the predicted y-values at each value of x;
  2. squaring each of these distances;
  3. calculating the mean of each of the squared distances.

Linear regression fits a line to the data by finding the regression coefficient that results in the smallest MSE.

What is simple linear regression?

Simple linear regression is a regression model that estimates the relationship between one independent variable and one dependent variable using a straight line. Both variables should be quantitative.

For example, the relationship between temperature and the expansion of mercury in a thermometer can be modeled using a straight line: as temperature increases, the mercury expands. This linear relationship is so certain that we can use mercury thermometers to measure temperature.

What is a regression model?

A regression model is a statistical model that estimates the relationship between one dependent variable and one or more independent variables using a line (or a plane in the case of two or more independent variables).

A regression model can be used when the dependent variable is quantitative, except in the case of logistic regression, where the dependent variable is binary.

What is the difference between a one-sample t-test and a paired t-test?

A one-sample t-test is used to compare a single population to a standard value (for example, to determine whether the average lifespan of a specific town is different from the country average).

A paired t-test is used to compare a single population before and after some experimental intervention or at two different points in time (for example, measuring student performance on a test before and after being taught the material).

What does a t-test measure?

A t-test measures the difference in group means divided by the pooled standard error of the two group means.

In this way, it calculates a number (the t-value) illustrating the magnitude of the difference between the two group means being compared, and estimates the likelihood that this difference exists purely by chance (p-value).

Which t-test should I use?

Your choice of t-test depends on whether you are studying one group or two groups, and whether you care about the direction of the difference in group means.

If you are studying one group, use a paired t-test to compare the group mean over time or after an intervention, or use a one-sample t-test to compare the group mean to a standard value. If you are studying two groups, use a two-sample t-test.

If you want to know only whether a difference exists, use a two-tailed test. If you want to know if one group mean is greater or less than the other, use a left-tailed or right-tailed one-tailed test.

What is statistical significance?

Statistical significance is a term used by researchers to state that it is unlikely their observations could have occurred under the null hypothesis of a statistical test. Significance is usually denoted by a p-value, or probability value.

Statistical significance is arbitrary – it depends on the threshold, or alpha value, chosen by the researcher. The most common threshold is p < 0.05, which means that the data is likely to occur less than 5% of the time under the null hypothesis.

When the p-value falls below the chosen alpha value, then we say the result of the test is statistically significant.

How do you find chi squared critical values in Excel?

You can use the CHISQ. INV. RT() function to find a chi-square critical value in Excel.

How do you find critical value on the chi

Left-Tailed Tests To find probabilities for areas to the left of a critical value, take your significance level and subtract it from 1. Use that column in the chi-square table to find the left-tail critical value. For example, if your significance level is 0.05, then use 1 – 0.05 = 0.95.

How do you find critical value in Excel?

You can use the T. INV() function to find the critical value of t for one-tailed tests in Excel, and you can use the T. INV. 2T() function for two-tailed tests.

What is the critical value in chi

A chi-square critical value is a threshold for statistical significance for certain hypothesis tests and defines confidence intervals for certain parameters. Chi-square critical values are calculated from chi-square distributions.